15 Homemade Water Fountains Ideas

Homemade water fountains can be the perfect addition to any outdoor space. They are easy to make and are also very affordable.

You can make them out of just about anything and they can be as simple or as complex as you want.

I have found 15 DIY water fountains that are perfect for your garden. Whether you want a pond with a waterfall or just a simple, inexpensive fountain,

you are sure to find it in this list of amazing DIY water fountains.

These are all so easy to make and you can have them finished in just a few hours. You could even add one of these 25 DIY garden paths to your garden to make it even more beautiful.

Whether you want a garden oasis or just a place to relax and listen to the water, you are definitely going to want to check out these DIY water fountains.

1. A Waterfall Wall

If you have a big enough wall, this is an amazing way to upgrade your space.

This is a great DIY project that will make your backyard look like a tropical oasis. This is a more advanced project, but it’s definitely worth it.

This project uses concrete for the walls, but you could also use stacked stone or even a stacked wood wall. You’ll also need a recirculating fountain kit.

2. A Waterfall Water Wall

This stunning water wall looks like a waterfall in the mountains. The water cascades down the wall and is collected in a basin below, where it is pumped back to the top.

The water wall is made from a piece of wood, a submersible water pump, and a couple of other supplies.

This is a great way to add a serene water feature to your backyard if you don’t have a lot of space.

3. A Waterfall Wall With A Sheet Of Glass

This is a really cool idea that would be a stunning addition to any outdoor area.

This waterfall wall is made from a large sheet of glass with a waterfall feature behind it.

You can also add LED lights to the waterfall to make it look even cooler.

4. A Waterfall Wall With A Sheet Of Copper

This is a beautiful example of a waterfall wall. I love that they used a sheet of copper for the water to flow down.

See also  25 Above Ground Pool Steps Ideas

This is a very simple project. The frame was built for the waterfall wall.

The copper sheet was then attached to the frame. Then the copper sheet was drilled to allow the water to flow down the copper sheet.

The water is then collected in a trough at the base of the copper sheet.

The water is then recirculated back up to the top of the copper sheet to start the process all over again.

5. A Waterfall Wall With A Sheet Of Stainless Steel

This is a very modern and sleek design that is a perfect fit for a contemporary outdoor living space.

This waterfall wall is made from a sheet of stainless steel that has been cut to look like a series of waterfalls.

Water flows down the sheet and into a basin where it is recirculated.

The water feature is framed by a wall of white brick and a living wall of greenery.

6. A Waterfall Wall With A Sheet Of Acrylic

A waterfall wall is stunning and elegant, but it’s also a lot of work.

You can make it a little easier by using a sheet of acrylic for the water to run down instead of building a wall.

This water fountain is made from a sheet of acrylic, a pump, and a basin. You can then add rocks and plants to the basin to make it look like a real waterfall.

The acrylic sheet is the perfect way to create a waterfall wall without all the hard work.

7. A Waterfall Wall With A Sheet Of Slate

This DIY water fountain is very similar to the last one, but the main difference is the slate. A sheet of slate is the perfect background for a water wall.

The water will glisten and sparkle as it runs down the sheet.

This one is also a little taller, so it’s perfect if you need a water feature to fill a larger space. I love the addition of the potted plants on top of the fountain, too!

8. A Waterfall Wall With A Sheet Of Marble

This is another example of a water wall, but this one is a bit more advanced.

See also  18 Outdoor Pool Area Above Ground Ideas

This project involves a sheet of marble, which you can get from a home improvement store.

The marble provides a nice, smooth surface for the water to flow down, and it gives the fountain a more high-end look.

This project also involves cutting a hole in the marble to fit the water pump.

If you don’t feel comfortable doing that, you could also use a different type of fountain head, like a bubbler or a spitter, that doesn’t require a hole to be cut.

9. A Waterfall Wall With A Sheet Of Tile

This indoor waterfall is a beautiful way to bring nature into your home. The water trickles down a wall of slate tile and is caught by a bed of river rocks.

The fountain is framed by a live edge wood slab and the water is collected in a basin at the bottom and recirculated.

A fountain like this can be made any size to fit your space.

10. A Waterfall Wall With A Sheet Of River Rock

This is a beautiful DIY project that can be customized to fit any space in your home.

The sheet of river rock is sturdy and can be placed in a base or attached to a wall.

The water is pumped to the top of the sheet and then cascades down the front. You can build a wall to surround the sheet or leave it open like this one.

11. A Waterfall Wall With A Sheet Of Wood

If you’re looking for a more modern and sleek look, this is the water fountain for you.

This DIYer used a sheet of wood and a few other materials to create a beautiful waterfall wall.

This is a great way to add some tranquility to any room in your home. You could even do a mini version of this on a table top.

12. A Waterfall Wall With A Sheet Of Bamboo

If you like the idea of a waterfall wall but you want to create a more natural look, you can use a sheet of bamboo as the base for your waterfall.

You can also use bamboo as the outer frame for your waterfall wall.

See also  18 Small Pool Deck Ideas

The bamboo will give it a more natural, tropical look. You can also add tropical plants and flowers around the base of the wall to make it even more tropical.

We love the way they added the flamingo to this fountain to give it a pop of color and a fun, tropical feel.

13. A Waterfall Wall With A Sheet Of Mirror

This is one of the most unique water fountains we’ve seen.

This project involves creating a waterfall wall with a sheet of mirror to create a stunning visual effect.

This project is a little more complicated than some of the others, but it’s worth the work.

You’ll need a mirror, a pump, a water basin, tubing, and a few other tools and materials to get started.

14. A Waterfall Wall With A Sheet Of Metal

This is a more modern take on a waterfall wall.

The water is still cascading down a wall of rocks, but there is a sheet of metal behind it to really make the water pop.

The metal is meant to be a backdrop for the water, so you can use any color you want.

But the copper color of the metal in this project is so beautiful and really makes the water stand out.

15. A Waterfall Wall With A Sheet Of Water

This waterfall wall is a little more complicated than the other waterfall ideas on this list, but it is well worth the effort.

The key to this project is the sheet of water. The sheet of water is what makes this project a waterfall and not just a water wall.

This sheet of water is made by attaching a clear plastic sheet to a frame.

The water is pumped to the top of the plastic sheet, and the sheet is angled slightly. The water will then flow down the sheet and into a basin at the bottom.

Conclusion

Which of these homemade water fountains do you like best? We love hearing from you, let us know in the comments section below! Don’t forget to share this article with your friends on Facebook, Twitter, and Pinterest!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *